Nate The Surveyor, post: 401071, member: 291 wrote: How much do GPS satellites weigh?If the calculator I used is correct: on earth they (BLK 2F) weigh...
Nate The Surveyor, post: 401010, member: 291 wrote: When you HAVE 6 different prisms, with varying offsets, (go set them up, you'll see)Yes I've done ...
Nate The Surveyor, post: 400230, member: 291 wrote: I have been trying to figure out a GOOD test.Post or tell me your ideas, and lets try it.NateI rec...
Grads&Meters, post: 400203, member: 12264 wrote: Cant say anything about torsional rigidity. Hard to test.Has anyone else been experiencing the sa...
Totalsurv, post: 400167, member: 8202 wrote: Sounds to me like they did.sneaky jerks can't hide nothin from you eh? To think they could put it in plai...
i should clarify - this statement:"Crain has now put the Tri-Max to the ultimate test, the ISO 12858-2-H. Not only did Crain test the Tri-Max, but the...
Mark Mayer, post: 399955, member: 424 wrote: Leica has a white paper on tripod stability. It turns out that Leica tripods are the best (who'd have thu...
Kent McMillan, post: 398344, member: 3 wrote: I assume that someone has evaluated different algorithms for estimating the line average refractive inde...
Nate The Surveyor, post: 397769, member: 291 wrote: I have never liked the common tribrachs out there. The ones with the optical plummet in them. Stic...
Jim Frame, post: 396434, member: 10 wrote: I haven't, because I'm usually running robotic, and ATR doesn't work much farther than half a mile either.i...
Jim Frame, post: 396406, member: 10 wrote: I've never gotten anything close to 2000m with a mini, but that may have more to do with heat shimmer than ...
I buy the Leica GPR111 basic series prisms to mount on the spigot on the Leica poles or carriers. The prism glass is generally mounted to +/- 1mm accu...
MathTeacher, post: 395325, member: 7674 wrote: Rod Deakin has addressed the problem rigorously. You only have to read the first few paragraphs to get ...
Scott Zelenak, post: 395098, member: 327 wrote: Suppose I want to fly a plane from a mythical airport at the equator and 0 degrees longitude to anothe...
BajaOR, post: 394482, member: 9139 wrote: What are your issues with LandXML? I rarely deal with it, but my sense is that it is a good format / standa...
Stephen Ward, post: 394436, member: 1206 wrote: There's a way to change how AutoCAD rounds but I don't remember the setting off the top of my head.The...
A Harris, post: 394387, member: 81 wrote: As I was taught, for example:0.025 = 0.020.035 = 0.04Autocad results:0.025 = 0.020.035 = 0.03It seems you w...
Seb, post: 394388, member: 7509 wrote: What state are you in Conrad? Is this part of eplan?Hello Seb, I'm in NSW, but none of this has to do with ePla...
Hello Scott, I'm in Australia
beuckie, post: 394281, member: 2245 wrote: Seems nice but i have the feeling about these instruments like a "combi-oven", traditional oven and microwa...