I have both and would recommend getting the two books.
DavidI never stated to "just pull off the fences". I always ran out the entire section to locate all the corners in order to do a complete breakdown o...
KrisI always thought the same way in all surveys regarding railroad locations. After attending a Seminar last November, Railroad Surveying 101, presen...
It appears to be a sideshot taken to a corner that is not a part of the parcel being described, but rather a reference tie for positioning the monumen...
Paul:I tried to post some images of a well location I did in 1982 for a client on Federal Leases or Federal Lands, but the files were too large and wo...
The center line of the rails is not necessarily the center line of the right of way and should not be used to determine the location thereof.
A good reference on how the G.L.O. did their section subdivisions (to set the C ¼ corner) can be found in the field notes that Deral of Lawton posted ...
Yeah, right and make sure you get it down on the grid. I gotta shake my head on this concept.
This is considered a "flat curve", 3°, and a chord for a chord (RR) defined curve is 100': for an arc defined curve (Hwy) is 99.99'. There is not a si...
"if nothing else: if the curve is calculated using the arc definition, but the stationing is calculated using 100-foot chords, the curve data given wo...
Rankin:Appears to be some bad data. Calc'd curve length doesn't check P.T. Station by 8 footies. 40+72.2 map = 40+80.2 calc'd from Central Angle and d...
General cad vs Carlson - CharlesPaul:What I did was put: Generic Cadd in my search (Bing) box. The site was Brother something or other. I will go back...
Paul:What about a Generic Cadd 6 drawing (GCD) file. Will they import in and open up and plot? I did a search on Generic Cadd, but there is not much o...
Lost Springs populationGlenn:That's the only way to travel from Cheyenne to Laramie or vice versa. Get up on top and let the wind blow you on into tow...
drafting-fonts- CharlesMy Win 7 computer is 32 bit Home Premium desktop. I put in the 32 bit version so hopefully my cogo and cad programs would load ...
drafting-fonts- CharlesWhat did Mark say the Virtual Machine was going to do and what does it take to try this?The port problem is something that will...
drafting-fonts- CharlesI got Survey 4.0 to work in windows 7, only the display screen is about ½ size or smaller, but so far I can't get Generic Cadd ...