Survey Pro Corrupt Raw File
One of my crew was having trouble seeing the screen on the TDS Recon with Survey Pro, so, I purchased a Ranger3 with Survey Pro. When I export the Job/RAW file and import it into Carlson Survey OEM 2020, the raw file is missing data. Some of the coordinate points are not in the correct location. The traverse does not close by many feet. I can’t locate the problem in the raw file because data is missing. We occupy #51 (5000,5000) and backsight #50 with an azimuth of 180?ø. The raw file shows OC #51, BS #0 with 180?ø Az with no distance to the BS.
The next reference to #51 is contains different coordinates. See attached. I have removed and reinstalled Survey Pro and Carlson Survey. I have checked all the settings, but I can’t figure this one out.
I spent hours last night going through the raw file (in the data collector), point by point, to replicate the survey. The data in the data collector is correct. The file appears to corrupt when transferring it into Carlson Survey.
I do not have this problem with the Recon,
Log in to reply.