need Help on Topcon Hiper Hardware issue
Hello community,
This is my issue: I gave my Topcon Hipper Gb base to a guy in order to fix a power issue (power connector was damaged), he fixed it, but when working in it he accidentally unplugged the connectors in the back front on the receiver (the opposed face to the MINTER, see the attached picture), when he plugged the connectors again, and after testing the receiver, no satellite is tracked even after one hour the receiver is powered on in an area where the rover tracked 9 to 12 satellite, Bluetooth is working fine, TX led is blinking green so I guess radio also is working, the only issue is satellite tracking, so I guess the guy missed something when he connected to cables (he knows nothing about GNSS receivers actually).
I would like if someone here have the same receiver ( the base because when we tried to learn from the rover unit it seems different), if he can help by sending me a picture of the cables as they should be.
Thank you friends.
Log in to reply.