Activity Feed › Discussion Forums › GNSS & Geodesy › Localization training video
No I don’t use localize to refine the base position. I only use localization to match a local system (with unknown relationship to the Earth) to a geodetic coordinate system. DPOS is Javad’s post processing service. Similar to OPUS, it processes the base to the 5 CORS. It also processes the base to rover points with raw data so that you have a comparison between RTK and the post processed vector.
The next Trimble Geospatial TBC Power Hour topic is site calibrations in TBC. If anyone is interested and needs the link let me know and I’ll forward it.
Shawn Billings, post: 455807, member: 6521 wrote:
No not really. You should re-watch this part. I zeroed the inclined plane. This effectively translated vertically using the average difference of all points held in vertical. Since there was no additional tilt, the vertical datum is based on the Geoid used for the surveyed points (in this case Geoid12B).
.Thanks Shawn, I saw that you zeroed the inclined plane, to me that meant the elevations would stay parallel with the ellipsoid, I wondered if doing that would apply the Geoid model to the points, glad to see it does. Are you holding the elevations of the control points of unknown projection and applying the Geoid to those elevations?
Log in to reply.