Activity Feed › Discussion Forums › GNSS & Geodesy › Leica/Wild GPS System 200/300 Data Transfer to PC
Leica/Wild GPS System 200/300 Data Transfer to PC
pfirmst replied 2 months ago 26 Members · 66 Replies
We used to have many of these older Wild systems, and the guy who repaired them is still around. I just called and found out that while replacement parts are not available Dave can still service the 299 and 399 hardware. He apparently also has bits and pieces of leftover units that can be cannibalized, so the replacement part might be there.
Contact:
Spatial Technologies
3671 Viking Way #10, Richmond, BC V6V 2J5, Canada
Office Phone: (604) 214-9453
Fax: (604) 214-9455
Hours of Operation:
Monday to Friday: 8:00am ÛÒ 4:30pm
Saturday, Sunday and Statutory Holidays ÛÒ ClosedFor Direct technical support call: 1 (855) 414-9453 – Ask for Dave Lockerby
Just call Spatial Technologies. They do not have the boot software that loads before installation of the firmware.
It was on an old computer that died many years ago… (and he doesn’t have any backup file).
So, Dave cannot service the 1165 battery issues.Looks like the gentleman in Poland is the only source for the internal battery repair and subsequent software load-up.
For parts, I do have a few CR344 controllers, and sensors and/or antennas for the System 399, if anyone is interested.
The controllers are 1165 affected though.mike1202, post: 371726, member: 9788 wrote: Send you a private message.
Hello mike. I have a sturdy old Leica SR9500 with CR344 that is used as base station for system 500 and thus very important to keep up and running. However, also mine CR developed that error 1165 now last year, first one, then the other. Thus – repair by the polsih repair guy would be a Perfect solution to keep thhis very rugged system operative. May I ask you to email me contact info for this guy? Thanks for any help!.
Regards Tor – NorwayNew in this forum, so maybe I posted on wrong tag. Case is; I use a Leica SR9500 as base station for 500 system rover, and both my CR344 have died with the error1165, so I would very much like to have contact info for the technician in Poland able to repair these (which Mike1202 mentioned first here I guess). Hopefully somone have contact info to him! – seems several on this forum were Lucky to get in touch. Thanks. Tor from Norway.
Lots of talk about a cable for downloading but for our System 500 downloads (from PCMCIA card) we would use a “lexar digital film reader”. I would suspect that they will also work with the 200/300 series. I have two of them in front of me right now, one for parallel port on PC, the other is USB port model. There are a number of these on ebay now in the $10 range. Its the one that has a somewhat translucent purple case. For the price, this might be something to try. Easier than building a cable.
I have some working SR9400 receivers if anyone is interested.
Terra, post: 411836, member: 12456 wrote: Hello mike. I have a sturdy old Leica SR9500 with CR344 that is used as base station for system 500 and thus very important to keep up and running. However, also mine CR developed that error 1165 now last year, first one, then the other. Thus – repair by the polsih repair guy would be a Perfect solution to keep thhis very rugged system operative. May I ask you to email me contact info for this guy? Thanks for any help!.
Regards Tor – NorwaySend you private mail.
Gabrielpamp, post: 412725, member: 12476 wrote: Hi, Mike. I am from Romanian. Please help me with the contact detail of the poland repaiman becouse I have an old C R controller with 1165 error. Thanks.
Send you private mail.
Hello, i have also a controller with 1165 error
Please help me with the contact detail of the poland repairman.
ThanksStadam, post: 346463, member: 10252 wrote: I’ve repaired my CR233 with 1165 error, by sending it to Poland to the same repairman.
I recommend him like very correct and great professional!
Don’t bother to send the item to him via DHL or other services.
Thanks to mike1202 to giving me his contact!Hello,
I have same problem …. so, as read in this network, I would like repair my CR344.
Please, can send detail of this guy in Poland. I need,
Thanks
FilippoGive Western States Cabling a call
you can contact Chris_1 from rplstoday.com
https://surveyorconnect.com/community/profile/chris_1/could you please tell me where did you solve the problem and how much does it cost? “error 1165”
hello sir
Myself i am computer hardware engineer in india. Sir my email id is [email protected], my uncle gave me cr333 for repairing the error code 1165 and 1250 is show me in display. Sir pls help me. Any thing u want for me i gave you. Please help me.
You can contact Chris_1 from rplstoday.com.
But i think you have to send the controller to poland.
I have Leica Sr399 with CR344 with error 1165 too, please can you send me some contact to guy from Poland?
Hello, i have also a controller with 1165 error
Please help me with the contact detail of the poland repairman.
ThanksHello,
I’m having the same issue so if someone could give me the contact for the miracle worker, that’d be great!
Cheers
I can’t reply to you directly but thanks Mike1202! ????
Hi,
I just got an old CR344 with an SR399, as expected with an error 1165 and came across this old thread.
Does anyone still have the old SKI software, Leica doesn’t offer any kind of support for this old system.
Thank you
Here you can find the Ski Software:
You can contact Chris_1 from rplstoday.com for repair.
But i think you have to send the controller to poland.
https://surveyorconnect.com/community/profile/4829/
https://surveyorconnect.com/community/surveying-geomatics/leica-1100-edm-board/paged/2/#post-449107
Log in to reply.