-
Configuration set for Leica ATX1230+ GNSS with PDL GFU15-2
Hi,
I am Praveel from Fiji. I have been working in Civil Engineering & Construction industry for just over 20 years now and am just setting up my business in this field in Fiji.
I have mostly used Leica instruments in field and collecting same for my business now. I recently purchased a used set of Leica ATX1230+ GNSS base and rover set from a local surveying company.
The issue is that the rover is not able to connect to the base for an RTK fix. Both the radios/modems installed are Pacific Crest PDL GFU15-2 and I have flashed them with the latest available firmware.
I have researched about these radios and found that these are receive only units. The surveying company where I bought these from, said these Leica units were fully functional with these GFU15 radios but the guy who was using it in the field has migrated.
I have been trying with all different settings, have gone over most of the Leica documention (over 2000 pages) but still can’t get the base to talk to the rover. Individually the base and rover track between 15 – 20 satellites each and they have the latest available firmware and almanacs.
The issue is with the configuration-sets for the PDL GFU15-2 radios which hinders communication between the base & rover and since these are old devices, Leica does not support them anymore.
Can someone please show me direction into which I might get some answers to resolving this problem. Thanks you.
Merry Christmas & A Happy New Year.
Log in to reply.