-
Carlson SurvCE 4
Could anyone help with the setup of My Surveyor2 running SurvCE 4. I always used Survey Pro in the past and utilized Repetition Shots for running my Traverse. Now with the switch to Carlson and the fact that I am now surveying as a one-man crew I am trying to figure out how to run my Traverse utilizing the SurvCE 4 program. In the past I was always behind the instrument running Traverse by BD/FD/BR/FR now I have no idea how to do the same running Robotically and how to setup the Data Collector to perform this.
I have been currently following this procedure fixed BS target and I run a BD/BR then I would take my side shots for topography or location. When I am ready to Traverse I run a BD/BR check then select T in the program and perform a FD/FR to the new Traverse. I am not sure if this is the correct method to follow Using this Data Collector, I would of thought there was a set collection rather then entering the back sight screen then the side shot screen to select T. Can anyone shed some assistance on the setup.
Kevin
Log in to reply.