Activity Feed › Discussion Forums › GNSS & Geodesy › Topcon static observation
-
Topcon static observation
Posted by On_Point on September 28, 2023 at 10:27 amWhile running a static observation with Topcon fc-6000 is it normal for it to show floating 4.0 horizontal and 8.0 vertical?
rover83 replied 11 months, 2 weeks ago 3 Members · 2 Replies -
2 Replies
-
If I understand what you are doing, I’d say it is normal. Float, while collecting static data, means that you have no integer solution (ie/initialization when in RTK mode). Collecting data in static mode, with no correction signal, your position is going to be +/- 10 feet or so.
Rejoice in that, it used to be +/-300′ when selective availability (SA) was active and the US constellation of GPS was the only game in town.
-
Static work is just data collection, so there’s no attempt to resolve ambiguities during the collection period. It’s going to be post-processed anyways….
That being said, if you’re tracking the realtime location of a receiver during a static session, and you have a fairly modern receiver tracking 2-4 constellations, it ought to settle down and bounce around within a few feet after 5-10 minutes or so….
“…people will come to love their oppression, to adore the technologies that undo their capacities to think.” -Neil Postman
Log in to reply.