In the field, with rover (Trimble R6-4) I noticed, that after getting corrections from base station, Beidou satellites are reduced only to 2 Sv's (nor...

You can try two things yourself, unplug batteries for a while (see if it will help) and/or load firmware using Floader instead of Topcon Receiver Util...

What field software? Any message while trying to connect to data collector? At this point with no additional info I can only suggest FW reloading. Re...

I was told the same by Leica representative, ME2 devices are about to stop working. Leica uses own FW. Maybe it is even possible to force load Novatel...

You can obtain this 2020 geoid in ASCII format and Trimble Grid Factory can read and convert it to GGF, the condition is, you need to define import te...

@brettv Trimble R8-2 receiver as the highest and most expensive model in its time has base option and radio transmit option enabled by default. But al...

In fact, Carlson devices are rebranded third party devices, like Carlson Surveyor2 = Juniper Systems Allegro II, BRx6 receiver is one of many incarnat...

By default Trimble receivers estimate Mean Sea Level using so called DMA WGS-84 geoid model prior to 4.70 firmware.

In regards of FW update to fix rollover issue, only Legacy E+ is eligible and Legacy E is obsolete.