-
pics of metal structures for tripod!!
pics of metal structures for tripod!
I’m about to do a survey configuration and contours of a ranch of large but there is a problem .., the vegetation is high for about 15-20 feet, my question is … have any idea how to make a structure metal approximately 10-15 feet and it put the tripod to make this contour lifting?? …..
prism … the stick and is about 16 feet, how I can put an extension to make it grandde, no, 22-25 feet, I can think of pvc pipe ….
… any suggestions???
fotos de estructuras metalicas para tripie!!
estoy por realizar un levantamiento de configuracion y curvas de nivel de un rancho de grandes extensiones pero existe un problema.., la vegetacion es alta de aproximadamente 15-20 pies, mi pregunta es…, tienen alguna idea de como fabricar una estructura metalica de aproximadamente 10-15 pies y en ella colocar el tripie para hacer este levantamiento de curvas de nivel??…..
…el baston y prisma es de aproximadamente 16 pies, como le puedo poner una extension para hacerlo mas grandde, no se, de 22-25 pies, se me ocurre un tubo de pvc….
… alguna sugerencia???
-
17 Replies
-
> prism … the stick and is about 16 feet, how I can put an extension to make it grandde, no, 22-25 feet, I can think of pvc pipe ….
Use a fiberglass rod adapter:
-
interesting … any other ideas?
interesante…, alguna otra idea??
-
Put the prism on the threaded end of a 4′ range pole section. Add however many 4′ sections of the range pole that you need, then attach range pole section to a prism pole.
-
that’s good …
-
Don’t even need the prism. With some good retro-reflective tape on the backside of a 25′ fiberglass rod, my Nikon 520 (non reflectorless) will shoot at least 600′ with a 2″ square at the top. Plus, the back of the ROD comes with a height graduation to measure clearances. Not good for control but topo might be OK
-
I don’t think my robot will track reflective tape. Never tried it, though.
-
Large ranch = LIDAR
-
and to make a tripod structure, have any pictures??
y para hacer una estructura a un tripie, tienen alguna foto??
-
One word, Bilby. Look up bilby towers
-
my god!!, that’s too much …, these photos give me good ideas .., have other suggestions??, just want to make a 10-foot structure …
mi dios!!, eso es demasiado…, estas fotos me dan buenas ideas.., tiene otras sugerencias??, solo quiero fabricar una estructura de 10 pies…
-
😉
-
:-O :-O :-O
-
do you think??, have a better idea?
que les parece??, tienen una idea mejor??
-
The instrument operator platform should be separate from the instrument to limit movement.
-
If you look real well at the Bilby tower you will see that it’s two towers, one inside the other to avoid moving the instrument as John Putnam said in the previous post.
-
I find the image in Bilby tower
no encuentro la imagen en Bilby tower
-
long ago had seen a picture in this forum, but can not find them …
hace tiempo habÃa visto unas imágenes en este foro, pero no las encuentro…
Log in to reply.